DODGE RAM Truck Manuals PDF & Wiring Diagrams (2024)

SomeDODGE RAM Truck Owner's Manuals PDF & Wiring Diagrams,Schematics are above this page - 1500, 2500, 3500, ProMaster;Dodge RAM Fault Codes DTC.

Ram Trucks (RAM) is an American pickup truck company owned by the automotive concern FiatChrysler Automobiles.

The independent structure of RAM was in 2011, having separated from the structure of Dodge.

Under the brand name Ram Trucks, full-size cargo pick-ups with a frame type of body are produced. Suspension - combined (in front - torsion shafts, rear leaf springs), or front - spring and fully spring on the cars of the third and fourth generation, respectively. Drive - rear or plug-in full.

The production of RAM pickups is carried out at enterprises located in the United States of America and Mexico. The first car was released in 1981.

The main family of options for the pickup includes three truck models - Ram 1500, 2500 and 3500 (until 1994, there were four: 100, 150, 250 and 350), whose graduation depends on the load capacity measured in pounds.

As a rule, in the case of full-size pickups, this is 500, 750 and 1000 kg (the carrying capacity is increased from generation to generation).

In 2008, a family of pickup trucks joined the line of trucks Dodge Ram, were produced trucks Dodge Ram 4500 and 5500.

The First Generation

The first-generation Dodge Ram pickups introduced in 1981 had the designations "D" and "W" for rear-wheel and all-wheel drive modifications, respectively. The power range of the Ram D / W was represented by three variants: a six-cylinder Chrysler Slant-6 with a volume of 3.7 liters and two eight-cylinder 5.2 and 5.9 liters.

In 1986, the stylistics of the body underwent a slight correction, and in 1988 the engine scale was renewed - the Slant-6 in-line unit was replaced by a 3.9-liter Chrysler LA 239 V6 engine with electronic fuel injection, then a 5.2-liter motor was added to the similar system, and 1989-th and 5.9-liter unit V8. At the same time, the anti-lock braking system ABS was included in the basic equipment.

The Second Generation

In 1994, the family of pickups Dodge Ram there have been significant changes, affecting literally everything: from the design of the exterior and interior to the main technical elements. As a result, the model added in overall dimensions, received a massive radiator grille and its own unique style that no longer resembled Ford and Chevrolet pickups.

Initially, the second-generation RAM was equipped with petrol engines V6 volume 3.9 liters and V8 volume 5.2 and 5.9 liters, as well as turbocharged diesel engine CumminsV10. After some time in the range appeared 8.0-liter petrol V10.

The Third Generation

The third generation Dodge Ram was produced for six years - in the period from 2002 to 2008 year. As before, the pickup was produced in versions with rear or four-wheel drive, with the latter case there were several options: with a rigidly connected front axle, manually connected Part-Time 4WD, without a self-locking differential.

In the line of engines, the most popular gasoline units Magnum and HEMI 4.7 and 5.7 liters, as well as 5.9-liter diesel engine Cummins.

Options: ST, SLT and SLT Laramie. The length of the body is from 1 meter 97 centimeters to 2 meters 43 centimeters. In 2004, a modification with a V10 engine from the Dodge Viper 8.3L sports car, named SRT-10, was on sale. The rear-wheel drive car received versions with a two- and four-door cab, originally equipped with only a six-speed manual transmission (automatic transmission became available later).

The Fourth Generation

The premiere show Dodge Ram fourth generation was held in January 2008 at the international motor show in Detroit. The novelty was even more adapted to everyday use due to the appearance of the rear wings with niches for carrying luggage, modified suspension hubs and dynamic stabilization system, as well as a thorough alteration of the cabin (the quality of the finishing materials and ergonomics have significantly improved). The appearance of the model embodied the current trends and characteristic features of the brand, due to which the pickup Ram retained its individuality.

In 2012 at the Auto Show in New York debuted the improved Ram 1500 with a modified exterior, improved aerodynamics, a revised power range and the newest automatic transmission TorqueFlite with eight steps.

DODGE RAM Truck Manuals PDF & Wiring Diagrams (2024)

FAQs

How do I reset my Dodge Ram ECM? ›

By Removing the ECM Fuse
  1. Ensure the vehicle is completely off.
  2. Locate the fuse box and open the cover.
  3. Find the ECM fuse on the fuse diagram.
  4. Carefully remove the ECM fuse and wait for 10-15 minutes.
  5. Reinsert the ECM fuse into its original location.
  6. Close the fuse box.
  7. Start the vehicle.
Sep 27, 2023

What is ECM on Dodge Ram? ›

The Electronic Control Module (ECM) is a vital part of any modern engine, using data gathered from the cooling system, intake, exhaust, and other components to deliver commands. It controls ignition timing, wastegate pressure, throttle position, and fuel injection timing.

How to get a truck out of ship mode? ›

Typically, vehicles are removed from Ship Mode and placed into Customer Mode by the dealer just prior to delivery. This is typically done using the dealer service tool.

What are the engine configurations on a Dodge Ram? ›

2022 RAM 1500 Engine Configurations
  • RAM 1500 5.7L HEMI® V8 with eTorque. The 5.7L HEMI V8 Engine with eTorque practically dominates the 2022 RAM 1500 engine configuration. ...
  • RAM 1500 3.0L V6 EcoDiesel Engine. ...
  • RAM 1500 3.6L Pentastar V6 Engine.

How to do a hard reset on a Dodge Ram? ›

Hard Reset Uconnect® Instructions
  1. Press the temperature up and down buttons simultaneously for at least five seconds.
  2. Navigate the menu that comes up on the screen and choose the option that prompts you to reset to factory settings.
  3. After choosing this option, wait about 30 seconds while the system reboots.

What happens if you drive with a bad ECM? ›

A bad ECM can cause a variety of engine problems, including decreased fuel efficiency, increased emissions, and engine misfires. In some cases, a faulty ECM can even cause the engine to stall. If you suspect that your ECM is failing, it's important to look into getting repairs.

What causes ECM to go bad? ›

Corrosion, Moisture, and Solenoid Damages

Corrosion on the wiring harness and increased moisture are frequent culprits behind faulty ECMs.

What does ship mode mean? ›

Defining shipping modes. The shipping mode is a way of shipping goods. More specifically, a shipping mode is the combination of a shipping carrier and the shipping service that is offered by that carrier. For example, ABC Shipping Company can have Overnight or Express delivery as their shipping modes.

What does transport mode do? ›

Transport Mode is a method of sending data over the Internet where the data is encrypted but the original IP address information is not. The Encapsulating Security Payload (ESP) operates in Transport Mode or Tunnel Mode. In Transport Mode, ESP encrypts the data but the IP header information is viewable.

Which RAM engine is best? ›

The Hemi family is legendary for its dependability very dependable. However, it's the 5.7L Hemi that stands out as the most reliable Ram Truck Engine Option. Even the no-compromise Hellcat Hemis are solid, going 100,000 miles or more without issue.

What is the most powerful engine in the Dodge Ram? ›

RAM 1500 TRX HAS THE MOST POWERFUL. FACTORY INSTALLED ENGINE IN ITS CLASS 1. The Legendary Supercharged 6.2L HEMI® V8 engine is only available on the 2024 Ram TRX and makes it possible for this beast to launch from 0 to 60 mph in just 4.5 seconds.

What does Hemi mean for RAM? ›

The word "hemi" is a shortening of the word "hemispherical," and as it relates to engines, means a type of engine that has a hemispherically shaped combustion chamber. It's the same thing that is meant in geography when referencing the Earth, which is split into two hemispheres, north and south.

How do I manually reset my RAM? ›

Push down on the tabs on either side of the RAM till it clicks out. Place the RAM on a soft cloth and in a safe place. Wait 60 seconds after removing RAM, this will ensure a full reset.

Can I reset my ECU myself? ›

The easiest way to perform an ECU reset is by removing the fuse from the fuse box. It is a very simple process, and all you have to do is pull out the car key, remove the fuse from the fuse box, and then put it back after about 15 to 20 seconds. Doing this clears any long-term memory stored in the car's ECU.

How long does it take ECM to reset? ›

To reset your car's computer, you should disconnect the battery and allow time for the residual energy in the electrical circuits to dissipate completely. Typically, this process can take anywhere from 15 minutes to an hour.

References

Top Articles
Latest Posts
Article information

Author: Horacio Brakus JD

Last Updated:

Views: 5720

Rating: 4 / 5 (71 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Horacio Brakus JD

Birthday: 1999-08-21

Address: Apt. 524 43384 Minnie Prairie, South Edda, MA 62804

Phone: +5931039998219

Job: Sales Strategist

Hobby: Sculling, Kitesurfing, Orienteering, Painting, Computer programming, Creative writing, Scuba diving

Introduction: My name is Horacio Brakus JD, I am a lively, splendid, jolly, vivacious, vast, cheerful, agreeable person who loves writing and wants to share my knowledge and understanding with you.